Powerware BPIII 300 Industrial UPS 225-300 kVA

Specifications:
Input Specifications
Frequency range: (60 Hz) 57-63 Hz
Surge protection: Meets ANSI C62.41
Category A & B: EN 50091-2, and EN 50082-2
Power factor: 0.95 typical at full load with input filter
Input current
distortion: less than 7% with input filter
Output Specifications
Voltage THD: Less than 5% (100% nonlinear
load with 3:1 crest
factor); less than 3% (100%
linear load)
Voltage regulation: Better than ±1%
Frequency: (free run) ±0.005 Hz
Frequency sync
range: ±0.5 Hz
Frequency slew rate: 1 Hz/second maximum

Eaton Powerware 5110 UPS 51100700A
Specifications:Capacity 700VA/420WDimensions (mm) HxWxD 270x87x260Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on-

Powerware BPII HE UPS 10 kVA/8 kw
Descriptions:Balanced Power II HE and Balanced Power II-S HE (BPII HE and BPII-S HE) offer the reliability of true online technology utilizing digital signal processing (DSP) control and monitoring. In addition, the BPII HE and BPII-S HE use the patented technology of an inverter software harmonic c

Powerware 9125 Rackmount UPS 91256000gRMHW
Specifications:Rating 6000VACapacity (VA/Watts) 6000/4200Dimensions WxDxH (mm) 441x633x219 Weight (kg) 94Input Connection Hard WiredOutput Connection Hard WiredOperationalNominal input voltage (Vac) 220/230/240 VacInput voltage range 120-288 Vac

Powerware BPIII HE UPS 62.5 kVA/50 kw
Specifications:Configuration: 3-Phase, 3 wire plus groundRange Nominal +10%, –15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9 with filterPower walk-in 3-60 seconds to full loadInput current 10% THD under nominal conditions distortion with filterTransient protection 6kV OC, 3 kV S

Powerware BPIV Industrial UPS 30 kVA/27 kw
Descriptions:The BPIV delivers enhanced backup power, power quality, and system reliability with the highest efficiency ratings of any online UPS in the 10-30 kVA range for industrial equipment. Powerware Industrial UPS systems offer cost savings with the best power protection.

Powerware 9170 Online UPS PW6S9K
Specifications:Technical InformationPlug/Connector Type HardwiredReceptacles HardwiredPower DescriptionLoad Capacity 9 kVAInput Voltage 110 V AC220 V ACInput Voltage Range 100 V AC to 276 V ACOutput Voltage 120 V AC208 V AC240 V ACFrequency 50 Hz60 HzPower Range 9 kVA to 9 kVA

Powerware 9125 UPS PW9125 2000 20R
Descriptions:the Powerware 9125 UPS delivers the ultimate in protection,truly isolating your equipment from all nine of the commonpower anomalies lurking in public utility power. Availableas either a rackmount or stand-alone unit, the compactand elegant 9125 supplies continuous, conditioned powerto

Powerware Plus36 UPS Model 24
Specifications: Input Frequency Range 45-65 Hz Power Factor 0.95 Typical at full load Output Voltage Regulation Better than +/- 2% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load) Transient Response Less than 5% for 100% load, step full recovery within 1/4 cycl

Powerware 9315-160 UPS Model 100 100kVA/80kW
Specifications:InputVoltage range: (See chart on other side)Frequency range: (60 Hz) 57-63 Hz; (50 Hz) 47-53HzPower factor: 0.95 typical at full load with inputfilter. Input current distortion lessthan 7% with input filtOutputVoltage regulation: Better than ±1%Transient response: Less than 5% for 1