Powerware Plus18 UPS Model 18

Specifications:
Input
Frequency Range 45-65 Hz
Power Factor 0.95 Typical at full load
Output
Voltage Regulation Better than +/- 3%
Voltage THD Less than 5% (100% nonlinear load);
Less than 3% (100% linear load)Transient Response
Less than 5% for 100% load, step full recovery within 1/4 cycle
Frequency Regulation (Free Run) +/- 0.1 Hz

Powerware 9125 UPS PW9125 2000 20R
Descriptions:the Powerware 9125 UPS delivers the ultimate in protection,truly isolating your equipment from all nine of the commonpower anomalies lurking in public utility power. Availableas either a rackmount or stand-alone unit, the compactand elegant 9125 supplies continuous, conditioned powerto

Powerware BPIV Industrial UPS 20 kVA/18 kw
Descriptions:The BPIV delivers enhanced backup power, power quality, and system reliability with the highest efficiency ratings of any online UPS in the 10-30 kVA range for industrial equipment. Powerware Industrial UPS systems offer cost savings with the best power protection.

Eaton Powerware 5110 UPS 51100700A
Specifications:Capacity 700VA/420WDimensions (mm) HxWxD 270x87x260Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on-

Eaton Powerware 5110 UPS 51100350A
Specifications:Capacity 350VA/210W Dimensions (mm) HxWxD 270x87x260Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on

Powerware 9125 UPS PW9125 1500
Descriptions:the Powerware 9125 UPS delivers the ultimate in protection,truly isolating your equipment from all nine of the commonpower anomalies lurking in public utility power. Availableas either a rackmount or stand-alone unit, the compactand elegant 9125 supplies continuous, conditioned powerto

Powerware 9305 UPS PW9305-7.5I-N
Specifications:Rating 7.5 kVA Capacity (VA/Watts) 7.5 / 5.25 Dimensions WxDxH (mm) 400x750x700 Weight (kg) 180 Input connection Hardwired Output connection HardwiredTypical runtime (Full load) 18 min (Half load) 40 min

Powerware BPIII Industrial UPS 30-160 KVA
Specifications:Configuration 3-phase, 3-wire plus groundRange Nominal +10%, -15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9with filterPower walk-in 3 to 60 seconds to full loadInput current 10% THD under nominal conditionsdistortion with filterTransient protection 6 kV OC, 3 kA pe

Powerware 9320-C03 UPS
Descriptions:the Powerware 9320 offersall three in a modular, scalableUPS. The Powerware 9320 isdesigned to provide redundancyas well as the ability to increasesystem capacity as your needschange by using 10 or 20 kVAmodules in a single cabinet

Powerware 9125 UPS PW9125 2500G
Descriptions:the Powerware 9125 UPS delivers the ultimate in protection,truly isolating your equipment from all nine of the commonpower anomalies lurking in public utility power. Availableas either a rackmount or stand-alone unit, the compactand elegant 9125 supplies continuous, conditioned powerto

Powerware 9125 UPS PW9125 1250i
Descriptions:the Powerware 9125 UPS delivers the ultimate in protection,truly isolating your equipment from all nine of the commonpower anomalies lurking in public utility power. Availableas either a rackmount or stand-alone unit, the compactand elegant 9125 supplies continuous, conditioned powerto